Repairing Water Damaged Floors

Posted by on August 28, 2015 in Flooring Repair, plumbing repair

Repairing Water Damaged Floors

Many different types of home repairs appear to be pretty easy for homeowners to carry out while others certainly seem like an expert could be required. Replacing flooring as a consequence of water damage might receive mixed feelings from different homeowners. However, we’ll be looking at a few of the fundamentals below in hopes of making it feel like a doable job for house owners.

There are different triggers for water damage to ones flooring in the home. Perhaps it is from a roof leak, which would likewise include ceiling and likely wall replacement as well. Or it may be via a slab leak which would definitely need the help of a professional plumbing repair company and entail smashing up the cement slab and re-pouring cement. . . all of which is a substantial undertaking. Or perhaps, the water damage could be from a hot water heater, bathroom or kitchen plumbing leak.

The first measure is to ensure one knows the factor for the water damage and is able to stop the leaking water. As soon as that is done, the flooring restoration can begin.

Indicators of Water Damage to FlooringPlumbing Repair Mansfield TX

Wood Floors
Cupping – when the floor boards have dips or elevated sides.
Dark Spots – this may be signs of mold or mildew, and are not merely part of the wood grain.
Bulging – when floor boards bubble up.
Buckling – floor boards are wholly loose from the floor beneath.

Tile and Linoleum
Stains – stains or discoloration may be a sign of water damage for tile or linoleum.
Hollow sound – should there be a hollow sound is noticed when tapped can indicate that the tiles are loose.

Measures to Repair Floors

Because we already definitely will make sure the water leak is fixed, the following measure is to ensure everything is dry. We are not going to proceed into great depth in this article with using fans, a dehumidifier or shop-vac, but make certain the location is thoroughly dry.

Remove the damaged flooring. Tools that could be needed are a saw, pry bar, or a knife for linoleum. Cut out any spots of damaged flooring. Water damaged tiles will already be loose underneath them and straightforward to pry away. For wood flooring, a saw is going to be necessary to remove the damaged portions. Try to stagger the cuts so when the new wood planks are put in it is going to match easier. Linoleum, when it is from a roll, should be cut back to walls. When it is from squares, it’s going to be less difficult to cut out the harmed ones.

Next, look at the condition of the subfloor. Regarding plywood subfloors, be sure that it’s not at all harmed from the water, for concrete, again, ensure that it is dry.

As soon as the subfloor is in fine condition, the replacement flooring can be installed. Very often, house owners can have excess wood or tile flooring parts left from the initial installation. Regardless if the flooring was initially installed by a previous property owner, take a peek in the garage and check if there is any leftover. In case it is a reasonably new floor, extra pieces can remain available from a DIY store.

All the best . and with any luck, replacing flooring from a water heater or plumbing problem will not seem like too large of a task for you now!